Brembo Set Monobloc M50 Radial Calipers 100mm mount, left + right hand, color Titanium, with pads (2 pads)

 
Brembo Set Monobloc M50 Radial Calipers 100mm mount, left + right hand, color Titanium, with pads (2 pads)

Brembo Set Monobloc M50 Radial Calipers 100mm mount, left + right hand, color Titanium, with pads (2 pads)  

Manufacturer: Brembo

Part Number: 220A88510

This Product is available in our warehouse

Customer Questions & Answers: ( 56 )

Compatibility with my bike

Choose brand and model

 

Our Price
€ 679.00

(Discount: 19.34%)
MSRP: € 841.80
  You save: € 162.80

 
Availability: In Stock
This Product is available in our warehouse
International Express (  Hungary):

 

  Description

Brembo M50 Calipers Set.

Over the past two years, first in MotoGP and then on SuperSport street motorcycles, Brembo has introduced new radial calipers with a smaller piston diameter.

The last generation calipers have a much higher modulability than the larger pistons calipers, reducing braking distances in the straight and increasing speed along corners, so far you can also brake along the first part of the corner and when you stop braking the load transfer between front and rear is smoother.

The motorcycles that have benefited immediately are the Ducati Panigale with Brembo M50 calipers and Aprilia RSV4 with M430 calipers (which is a M50 with a different name).

Along with these calipers a different master cylinder is required, , that's why Brembo has introduced the 17RCS .

The 17RCS then arises halfway between the 15RCS and 19RCS sharing the possibility of variation of the fulcrum common to the entire range .

Technical Characteristics:

  • Pistons : Ø 30 mm.
  • Construction Material : Casting Aluminium
  • Finishing : Titanium Grey
  • Weight (with pads) : 930 gr.
  • Brake Fluid : DOT 4
  • Hardware : Steel
  • Pistons : Aluminium
  • Center to Center : 100 mm.
  • Offset : 30 mm.

Brembo recommends not to install this caliper if the motorcycle oem brake system is a ABS System (for example not recommended on BMW S1000RR without removing ABS Brake lines).

OFFICIAL BREMBO RACING POINT

Purchase from us with confidence, Carpi Moto is an authorized and official Brembo Racing Point.

 
  Customer Questions & Answers
Question:
 Is this caliper compatible with Brembo 19 RCS master cylinder? I read in a blog that there could be problem with feeling at the lever is this correct?queste pinze sono compatibili con le pompe Brembo 19 RCS? Ho letto che il "rapporto idraulico" potrebbe non essere ottimale e risultare in scarsa modulabilita' e' vero?
March / 13 / 2014
Answer:
Yes is correct , Brembo recommends 17RCS for these calipers to get max brake feeling. But since now every Panigale or Aprilia RV4 owner have installed 19RCS without any problem. 17RCS will arrive soon.

Question:
 M50 in black??
May / 28 / 2014
Answer:
Not sold by Brembo

Question:
 Hey there. The description for these calipers says: color Black. Do these calipers come in black?Will they fit my Aprilia Tuono V4R APRC 2013 (non abs) and if so do i need to get new brake lines?thanks in advance.
August / 28 / 2014
Answer:
This calipers are color Titanium, like the pictures. Ducati and Brembo call them M50, Aprilia call them M430, but it is same caliper. It used on other RSV4 version so I think it could be used on your model too.

Question:
 Hi there,I would like to purchase these for my 2013 Aprilia Tuono V4r 2013. I have a couple of questions.1 - Im assuming the Brembo 17RCS is the MC to use with these calipers?2 - Do these calipers work with my stock brake lines? ( i already have the correct line going from the 17RCS). If not do you sell a kit for the correct line setup for my bike? Can you include a link if you do?3 - Is the mirror mount bracket for the 17RCS for my stock RH mirror the 10 x 1.25 Right Hand thread?Thanks in advance,Adam
September / 06 / 2014
Answer:
1) 17RCS is the right mc. 2)I don't think so, The inlet is in a different position. We can order to Fren Tubo the lines with specific fittings (order stock lines and specify the will work with M50). 3) 17RCS comes without a mirror clamp, you can order the M10x1.25 clamp.

Question:
Do I have to consider offset to fit these to my 2014 hypermotard sp. The spec sheet gives it at 30mm. Do you know what my bike has for offset.
July / 23 / 2015
Answer:
You don't need to consider offset, they have the same caliper offset of your calipers.

Question:
 I have a good evening multistrada 1200 no abs and I put 19 rcs brake pump and I want to put the M4 caliper below will be compatible.
August / 03 / 2015
Answer:
These calipers are M50, not M4. For M50 Brembo recommends 17RCS , for M4 Brembo recommends 19RCS

Question:
 Hi, I would like this use this with my 2015 S1000RR. I've got a RCS19 fitted too. Would this fit? Will my stock brake line fit?Many thanks, and happy new year!
December / 27 / 2015
Answer:
Thank you for contacting us through our website. Yes I confirm this part is correct and works fine with 19RCS. We can't confirm it will fit straight away your brake lines.

Question:
I would like to install these calipers and wanted to know if they are compatible with my MV Agusta Brutale 910s. It has an axial pump but do not know the dimension and compatibility without braking abs
January / 18 / 2016
Answer:
Hello, you can't install these radial calipers on your bike. You need to change fork feet.

Question:
Would these work with the abs system on my Ducati 899 and what master cylinder would work best,Thanks 
March / 07 / 2016
Answer:
Hi, this calipers can't be used with ABS system.

Question:
 Hi, I would like to install these calipers on my MV Agusta F4 2014. My bike's original calipers are M40. What is the difference between them and are there any improvement after installed the M50? Will it affect the abs too? Thank you.
March / 23 / 2016
Answer:
M4 have bigger diameter pistons, M50 are the evolution of M4, smaller pistons to improve modulability. We can't confirm you can use with ABS because of different diameters

Question:
 Hi there, can you supply the M50 calipers in different colours? The Brembo website shows them in different colours in the moving banner on this page: http://www.brembo.com/en/bike/original-equipment/products/calipersThank you!
May / 30 / 2016
Answer:
Marketing... these calipers are not sold by Brembo in the real market, not yet.

Question:
Brembo do these in 108mm fitted to the ZZR1400 Performance Edition. Are they available in 108mm?
June / 15 / 2016
Answer:
M50 are only 100mm.

Question:
 They are not 100mm on the Kawasaki and they are the identical calipers and MC fitted to the H2/H2R - M50
June / 15 / 2016
Answer:
If you scroll our application list you will see that right now just the ZX-10R 2016 fits 100mm calipers

Question:
 Hi,I have a 2016 Aprilia Tuono 1100 Factory. I am looking to upgrade the front braking to get more stopping power and feel. What is the better solution:Brembo 19RCS and Brembo Monobloc M4orBrembo 17RCS and Brembo Monobloc M50
July / 12 / 2016
Answer:
Hi, you can purchase 19RCS to improve your braking system. You can't change calipers because you have ABS System. Changing calipers it couldn't work the right way in any case it is at your own risk. To improve your braking power you can also change pads.

Question:
 If the m430 and m50 are basicaly the same calipers how com in real life braking performance bikes equipped with m50 outperformed bikes with 430 calipers?
August / 31 / 2016
Answer:
Brembo official reply: "la M50 si chiama così perché quando uscì in esclusiva sulla panigale erano i 50 anni di Brembo, l’anno dopo quando la montò Aprilia prese il suo nome di progetto che da sempre è stato M430" > M50 is so called because when it came out exclusively on panigale it was the 50 years Brembo anniversary, then one year after when was used on Aprilia took the project name that has always been M430

Question:
 Will this calipers fits RSV4?
December / 13 / 2016
Answer:
Yes sure. Please note thet RSV4 use same caliper with a different name (M430).

Question:
 What compound is the pads supplied with the M50 Radial Calipers?
February / 16 / 2017
Answer:
90 or 93 .

Question:
Will M50 calipers and 17 RCS fits my MV F3 675?
February / 26 / 2017
Answer:
Yes they will.

Question:
 Hi, can I fit the M50 calipers to Aprilia Tuono 1100 Factory 2015 with ABS as the 2017 model has these ? calipers as standard. Thanks again Ray.
March / 01 / 2017
Answer:
Brembo recommends not to install this caliper if the motorcycle oem brake system is a ABS System because the ABSis set to another caliper.

Question:
Hi thereBMW S1000RR 2015 to replace lines to use the brake caliper Radial Calipers 100mm M50 mount?Or the original lines can do the job.If not, then what lines to replace what recommendation?
March / 05 / 2017
Answer:
We can provide custom made lines, you can't use oem lines.

Question:
 Is this fit to ktm duke 690 2014
March / 20 / 2017
Answer:
We don't know, not tested on your bike. Also you should need one caliper and not tw.

Question:
 For BMW R ninet which one do yo recomend I have the MC RCS17 install nowI'm thinking to upgrade Brembo M50 , M4, GP4RX, Cafe racer I don't really ride that much just some little touring and city use. just want the optimal for the bike with good brake. Thank you
June / 11 / 2017
Answer:
Good Morning, for a cafè Racer bike we suggest M4 34 black, code 220988550 or CNC P4 32/32 220B47310 or 484 pn 220B47310. Please note: remove ABS System.

Question:
 Question more on R ninet,Why i need to remove the ABS system? So if i change the caliper i can't have ABS ?Thank you
June / 14 / 2017
Answer:
Because ABS is set to stock calipers.

Question:
 What size spacers would be needed to fit these to a Triumph Daytona 675R with 308mm discs? Many thanks.
June / 22 / 2017
Answer:
Brembo does not produce any spacers for Triumph Daytona 675R, we can't provide this info.

Question:
 Hi.Ducati 1198sp should I use caliper m4 or m50?I have a brembo rcs 19 What benefits would m50 brings to me with rcs19Can I have problems using rcs19 and m50?
August / 15 / 2017
Answer:
Yes you can use both with 19RCS without any problem. M50 is a new technology caliper you will have a better response and modulability.

Question:
 Hi,what does the m50 kit includes the complete set?or do I need to buy anything extra?
August / 15 / 2017
Answer:
Includes two caliper's complete of their pads.

Question:
 Hi. Do you sell the supermoto specific model of M50? Just like the Husqvarna FS450 stock caliper. Thanks.
September / 10 / 2017
Answer:
Hi, there isn't a M50 caliper specific for supermotard use. It's not so simple change caliper on supermotard. M50 caliper may touch the wheel becuase it's wider than stock motard calipers. We suggest you P4 30/34 Motard, code XA78910

Question:
Hello; I keep reading that the M50/M430 isn't suited for ABS systems (e.g. the question about fitting them on a Tuono) yet you confirm that these calipers come on the Panigale and RSV4, which do have ABS. Can you explain why it wouldn't work on e.g. Tuono but it would on an RSV4, given that the Tuono 2016 comes with M430 (or M432?), Tuono 2017 with M50, RSV4 2016 with M430 and RSV4 2017 with M50... all having ABS. It confuses me quite a bit...
September / 23 / 2017
Answer:
ABS motor works combined with oem calipers. The OEM calipers' pistons require a specific brake fluid volume then the ABS motor has a reservoir with a suitable brake fluid volume: using different calipers with different pistons , with different brake fluid volume could cause the ABS motor to work empty of liquid, so far no liquid will arrive to calipers... For this reason we will never write that you can use on a ABS equipped model. Maybe nothing will happen and you will enjoy your Brembo new calipers, BUT we can't write and confirm you can use it.

Question:
 Hi. A very simple question, but I just can't find the answer anywhere... ; how can I see/ascertain which pads are included when buying a particular set of calipers? e.g. when I look for M50 on the Brembo site, all it says is 'brake pads included? yes'... which is good to know but doesn't say anything about the type that are included. Is there a definitive list or table somewhere that specifies which pads come as standard with M432, M430/M50 etc? e.g. "M50: Brembo SC", "M432: Brembo SA", etc etc...
September / 25 / 2017
Answer:
Hi, right now pads included are 07BB3793 for all caliper kit.

Question:
 se puede adaptar las m50 para yamaha mt09 2014 sin abs
November / 03 / 2017
Answer:
Hi, no you can't. You can install M4 calipers code 220A39710 with adapters 220A06175.Hola, no, no puedes. Puede instalar M4 código 220A39710 con adaptadores 220A06175

Question:
 On 2016 Rsv4 with the m430 caliper and factory abs ..would you say motul RBF600 is a good brake fluid to use ? Or suggest another high performance brake fluid ? Also would you say the RCS17 is noticably better then the stock 16 master cylinder ? Thx in advance
January / 03 / 2018
Answer:
RBF600 is a Racing Brake fluid, then to be used only if you drive on tracks, one of the best so far. RCS17 is a good upgrade to the RSV4 listed in our application list.

Question:
 Hay algún modelo de pinza radial delantera en 100mm de BREMBO para mi Honda X ADV?Gracias
July / 11 / 2018
Answer:
Non puoi montare nessuna pinza perché il disco è troppo sottile. Io ho XADV, sulla mia ho montato i tubi freno Fren Tubo e va molto bene. No puede montar pinzas porque el disco es demasiado delgado. Tengo XADV, en mi he instalado los tubos de freno Fren Tubo y es muy bueno.

Question:
 Sabes que modelo de pinza monta esta X adv
August / 21 / 2018
Answer:
Non monta, i dischi sono troppo sottili. It does not fit at all, disks are too thin.

Question:
 I have a 2014 Hypermotard 821. The stock brakes are really spongy and suffers double pump. I would like a strong, progressive feel at the brake lever. I dont want a stiff or soft feel. Which combo will give me this progressive feel? RCS17+M50 or RCS19+M4 calipers? Are the M50 calipers worth the extra 100€? Thank you.
October / 18 / 2018
Answer:
On a Hyper I would like a modulable braking then I will recommed 17RCS + M50. M50 are the evolution of the M4, they worth the money difference.

Question:
 are the M50 comptible with the 2008 Ducati 848 (non EVO).? Currently has the 2 piece stock Brembo caliper. This bike is non ABS. The Evo came with the M4. Can I skip those and go right to the M50 with the understanding I need to change the mastercylinder too. What is the benifit of the M50 over the M4 other than weight?
November / 10 / 2018
Answer:
M50 are the evolution of the M4. The benefits over M50 is the modulability, expecially if combined with 17RCS master cylinder.

Question:
 Hello there..I have purchased for my race bike Kawasaki Zx10r 2013 year of made, new BREMBO M50 calipers..before that I was driving stock calipers with ACCOSSATO 19x20 brake pump...brake feel was great and hard all the time...so much little brake travel...But now after installing BREMBO M50 calipers, brake feel is softer, much softer....any advice please?
February / 04 / 2019
Answer:
We don't sell Accosato parts. We can just tell you that the right master cylinder for M50 is the 17RCS or the CNC 19x18 .

Question:
 Hi Team, will this caliper fit my Ducati Scrambler 2018 Street Classic?
April / 20 / 2019
Answer:
No. This ia a two calipers set therefore you can't install the right caliper

Question:
 Is the stayed pricing for a pair (left & right)?Thank You.
May / 28 / 2019
Answer:
Yes sure, left + right hand.

Question:
 Hi, are these calipers narrower than the M4? I understand that they are shorter and overall smaller than the M4 but I'm curious if the width has also been reduced and by how much. Thanks!
June / 06 / 2019
Answer:
Open the pdf schematic, there are all the meausures.

Question:
 Is the M50 possible on a Multistrada Pikes peak model 2013/2014 without further modifications.this in connection with combined braking system.Thank you
September / 05 / 2019
Answer:
We don't confirm. The brake line banjo fitting could be different.

Question:
 Hello, i want to use only one brembo caliper + one 320 mm disc on my lighter 155 Kg bike. Which model did you recommand ? M4 or M50 ? and which Brembo master cylinder ? PR 17 or 19 ? thanks
November / 21 / 2019
Answer:
One single caliper should wotk with a 16mm master cylinder, also with 15mm. With 17RCS you will have a very powerfull braking, less modulable. M50 is an upgrade of M4. Without information about the bike and its use we can't add any other advice.

Question:
 Ahoj na monster 1100 evo abs mam brembo 19rcs chcem dat M50 je možné a bude fungovat
December / 03 / 2019
Answer:
M50 works fine with 17RCS, but you can use them as well 19RCS. Please Read about what we write about ABS. M50 funguje dobre s 17RCS, ale môžete ich použit aj s 19RCS. Precítajte si, co píšeme o ABS

Question:
Hello, I have interest to buy the M50 Calipers but only using the left hand side to modify my scooter(Honda PCX 150 2019, I do have adapter for 100mm radial caliper, single disk), I got some questions about that: 1) what size of the master cylinder I should pick? Like PS13, 15, or others? 2) Is M50 only sell as pair? will it sell one side only since I only need the left hand side? 3) Any other 100mm radial calipers sell by Capimoto similar with M50 and able to purchase one side only? Thank you.
March / 05 / 2020
Answer:
1) 15mm 2) M50 are sold only as a pair 3) Brembo Monobloc M4 34 Radial Caliper 100mm mount, Left hand, with pads (2 pads), color Titanium Part Number: 20988530

Question:
 Hi, my bike is triumph speed triple rs ‘18. I want to upgrade M4 brembo call to M50. Please let me know if they fit or need modification. Thx
March / 07 / 2020
Answer:
If you already mount a Brembo M4 you can switch to any 100mm mount Brembo calipoer, M50 included .

Question:
Ciao;Per poter montare queste pinze su una BMW bmw S1000R (nuda) del 2015.Basterebbe cambiare i tubi dei freni, in modo che l'ABS funzionasse correttamente?
March / 14 / 2020
Answer:
Occorre cambiare i tubi per raccordare le pinze, ABS va scollegato.

Question:
will be fit bmw R1250gs R1200gs sereis?
March / 17 / 2020
Answer:
We don't list as compatible because it won't comply with ABS system, not certified.

Question:
 Hi,I have a KTM SUPER ADVENTURE 1290 S (2018 YEAR) and have just bought a Brembo 17RCS Corsa Corta from Carpi Moto.Is this the correct master cylinder for the OEM brake Calipers ? What are the piston sizes in the original OEM calipers ?Which Brembo calipers would you recommend to upgrade to ? I am thinking M50 calipers or GP4RX ?
April / 08 / 2020
Answer:
17RCS is correct and will be correct for both M50 and GP4RX, we recommend GP4RX

Question:
 Hiwhat pads fit to this Calipers to my bike Tuono Factory 2020?Thanks
April / 21 / 2020
Answer:
Pads that fit these calipers are all listed inside this page, for example the spare genuine Brembo 07BB3793

Question:
 Hi, I have a Bmw s1000rr 2018 with ABS and the Brembo Corsa Corta master cylinder. I want to replace the original Brembo calipers with the Brembo M50 calipers, is that possible and can this be combined with the ABS system?
June / 08 / 2020
Answer:
Yes it is possible to mount on your bike with RCS Corsa Corta. ABS: please our most recent answers.

Question:
 Hi there, does this fits Honda X-adv750 2019? Do you have link for rear caliper as well? Thanks
September / 10 / 2020
Answer:
Thank you for contacting us through our website. We confirm that this product is NOT compatible with your motorcycle. If you use the 'Compatibility with my bike' tool you can check it by yourself, and you will also get useful tips to search for your motorcycle compatible parts. You can also find products compatible with your bike by filtering the site for your model year, you can also extend or limit the search using the filter by manufacturer or by category. NB: the '-' symbol before or after a year indicates 'up to the model year' or 'starting from the model year'.

Question:
 Can I use this caliper with 4mm thickness full floating disc?
October / 30 / 2020
Answer:
We do not recommend, the recommended disk is 5mm; when the pads will be worn-out they could go outside the caliper housing.

Question:
Hi, i own a 2017 Speed Triple R with stock BREMBO M4.34 calipers (34mm pistons diameter), stock master cylinder (18mm diameter), DOT4 brake fluid, stock brake discs (4,5mm thickness), EBC HH pads. Seems like you don't recommend to change stock BREMBO M4.34 for BREMBO M50 calipers because of it's different piston diameter and, in consecuence, different brake fluid volume that can cause ABS malfunction...at the same time, i read here recommendations of switching the M4 Brembos for the M50s (34 vs 30 piston diameter). Sorry, but i misunderstood something? What is your recommendation in my particular case? M4.34 Brembos have a terrible double touch feeling, and i NEED to solve it...Thanks in advance 
November / 18 / 2020
Answer:
Our Advice is: dismount pads, clean disks and calipers, mount genuine pads ( 07BB3793 ), change the master cylinder >>> Brembo 19RCS , use Super Dot 4 Brake fluid .

Question:
 I want to replace the M4.32 calipers on my Ducati V2 - is the M50 caliper a direct replacement - just not sure about the offset etc?.the road V2 comes with a 16mm master cylinder piston - would you recommend swapping this for a 17?
November / 26 / 2020
Answer:
M50 is a direct replacement. We recommend to use a 17RCS .

Question:
 Hi, will this fit to my xadv750 2019? The catalogue shows its sold in pairs right?Thank youWhich lever is suitable for this? Rcs17 or 19?Thank you.
November / 24 / 2022
Answer:
Brembo calipers are not compatible with Honda XADV disks because they are too thick. Pads won't stay inside the caliper when worn, therefore it is extremely dangerous to mount them.

Question:
What is the torque setting for the banjo bolt on these calipers? (For a single brake line, if that matters.)Also, can you link to the recommended banjo bolts and crush washers to install these calipers?
January / 23 / 2024
Answer:
The torque depends on which kind / material / brand are made the bolts. For example Fren Tube: Tightening Torque Steel Fittings 20Nm , Tightening Torque Aluminum Fittings 15Nm . Banjo bolts are listed already inside this page, they are M10x1mm . Washers are inside the bolt page.

Question:
What exactly is included in the box with these calipers? I've seen on other website listings for the Brembo M50's (same part number 220A88510) there are 2x banjo bolts, 4x copper crush washers, and 2x thermal sensitive caliper tape listed as part of this kit. Are those included here along with the pads?
February / 02 / 2024
Answer:
We open a box, includes: Pads: 07BB3793. Washers: 4 copper washers. Thermo tapes.

New Question

Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.

 
 I have read and integrally accept information about use of personal data
*obligatory fields (will not be displayed, we only need them to send you the answer)

Spare Parts

Brembo OE Caliper Pad Spring, for M4, M430, M50, GP4 RS calipers, part number 120225579Brembo OE Caliper Pad Spring, for M4, M430, M50, GP4 RS calipers, part number 120225579
Part Number: 120225579
Availability: In Stock
Price  € 16.47 - € 14.82

Linked Products

Brake Pads Brembo 07BB37LA Sintered Street (1 couple for 1 disk)Brake Pads Brembo 07BB37LA Sintered Street (1 couple for 1 disk)
Part Number: 07BB37LA
Availability: In Stock
Price  € 70.94 - € 40.44

Brake Pads Brembo 07BB37RC Extreme Racing (1 couple for 1 disk)Brake Pads Brembo 07BB37RC Extreme Racing (1 couple for 1 disk)
Part Number: 07BB37RC
Availability: In Stock
Price  € 102.91 - € 58.66

Brake Pads Brembo 07BB37SA Sintered Street (1 couple for 1 disk)Brake Pads Brembo 07BB37SA Sintered Street (1 couple for 1 disk)
Part Number: 07BB37SA
Availability: In Stock
Price  € 68.21 - € 38.88

Brake Pads Brembo 07BB37SR Sintered Racing (1 couple for 1 disk)Brake Pads Brembo 07BB37SR Sintered Racing (1 couple for 1 disk)
Part Number: 07BB37SR
Availability: In Stock
Price  € 82.47 - € 47.01


Brake Pads SBS Dual Carbon 841DC, (1 couple for 1 disk)Brake Pads SBS Dual Carbon 841DC, (1 couple for 1 disk)
Part Number: 841DC
Availability: OUT OF STOCK
Price  € 55.00 - € 38.50

Brake Pads SBS Dual Sinter 841DS-1, (1 couple for 1 disk)Brake Pads SBS Dual Sinter 841DS-1, (1 couple for 1 disk)
Part Number: 841DS-1
Availability: In Stock
Price  € 196.17 - € 137.32

Brake Pads ZCOO B005 EX Compound, (1 couple for 1 disk)Brake Pads ZCOO B005 EX Compound, (1 couple for 1 disk)
Part Number: B00500
Availability: In Stock
Price  € 99.66 - € 64.78

Brake Pads ZCOO B005 EX-C Compound, (1 couple for 1 disk)Brake Pads ZCOO B005 EX-C Compound, (1 couple for 1 disk)
Part Number: B00501
Availability: In Stock
Price  € 114.08 - € 79.86

Brembo Set Monobloc GP4 RS Radial Calipers 108mm mount, left + right hand, with pads (2 pads)Brembo Set Monobloc GP4 RS Radial Calipers 108mm mount, left + right hand, with pads (2 pads)
Part Number: 220C78310
Availability: In Stock
Price  € 910.41 - € 755.64



Brembo Set Monobloc M4 34 Radial Calipers 108mm mount, Left + Right hand, color Titanium, pads includedBrembo Set Monobloc M4 34 Radial Calipers 108mm mount, Left + Right hand, color Titanium, pads included
Part Number: 220A39710
Availability: In Stock
Price  € 778.47 - € 622.78

Brembo Set Stylema Radial Calipers 100mm mount, left + right hand, color Titanium, with pads (2 pads)Brembo Set Stylema Radial Calipers 100mm mount, left + right hand, color Titanium, with pads (2 pads)
Part Number: 220D02010
Availability: In Stock
Price  € 989.58 - € 791.66

CNC Racing Billet Bleed Valve Cover Kit, 6 rings, choose colorCNC Racing Billet Bleed Valve Cover Kit, 6 rings, choose color
Part Number: KS250
Availability: Select from the list
Price  € 40.87 - € 36.78

Fren Tubo Banjo Bolt M10x1 mm Double, chromium-plated steelFren Tubo Banjo Bolt M10x1 mm Double, chromium-plated steel
Part Number: B19005CR
Availability: In Stock
Price  € 3.96 - € 3.57

Fren Tubo Banjo Bolt M10x1 mm Single, chromium-plated steelFren Tubo Banjo Bolt M10x1 mm Single, chromium-plated steel
Part Number: B19001CR
Availability: In Stock
Price  € 2.81 - € 2.53

Radial Brake Master Cylinder Brembo 17RCS; Fold-Up Lever, 18-20 ratio, switch stop; for two disks brake systemsRadial Brake Master Cylinder Brembo 17RCS
Part Number: 110A26340
Availability: In Stock
Price  € 359.90 - € 248.33

Radial Brake Master Cylinder Brembo 17RCS Premium Kit WhiteRadial Brake Master Cylinder Brembo 17RCS Premium Kit White
Part Number: RCS17PK
Availability: In Stock
Price  € 284.26

 
  Works on my Bike?
  • Aprilia 
  • Benelli 
  • Bimota 
  • BMW 
  • CFMOTO 
  • Ducati 
  • Honda 
  • Indian 
  • Kawasaki 
  • KTM 
  • Kymco 
  • Moto Guzzi 
  • MV Agusta 
  • Triumph 
   Linked Products