Universal Radial Master Cylinder Adaptor, includes 1 adaptor, 4 bolts, 5 washers

 
Universal Radial Master Cylinder Adaptor, includes 1 adaptor, 4 bolts, 5 washers

Universal Radial Master Cylinder Adaptor, includes 1 adaptor, 4 bolts, 5 washers  

Manufacturer: Fren Tubo

Part Number: 170101

This Product is available in our warehouse

Customer Questions & Answers: ( 34 )

Compatibility with my bike

Choose brand and model

 

Our Price
€ 20.00

 
Availability: In Stock
This Product is available in our warehouse
International Express (  U.S.A.):

 

  Description

Do you want to change your stock master cylinder and fit a radial one? Do you want to keep the brake lines your bike is fitted with?
This adapter is what you are looking for!
The adapter is a link that, fitted between the radial master cylinder and the stock brake lines ( or aftermarket copy ), permits a 90 degrees rotation and positioning of the brake hose end. The stock brake hose end will work as it was fitted to an axial master cylinder.

The kit includes:

  • 1 x Adaptor
  • 1 x Single Banjo Bolt M10x1mm to be used on radial master cylinder.
  • 1 x Single Banjo Bolt M10x1.25mm to be used on radial master cylinder.
  • 1 x Single Banjo Bolt M10x1mm to use on the adaptor with oem single line.
  • 1 x Double Banjo Bolt M10x1mm to use on the adaptor with oem double lines.
  • 5 x Aluminum Washers.

FAQ: Q: Does this fit on my bike? A: We do not have an application list. The only reason it may not fit is the lack of space under the handlebar and/or the interference with the electric controls.
The adapter is 42,5mm long, to which you need to add the width of one of two banjos and the bolt head. The picture shows the adapter mounted to a Brembo RCS master cylinder. Use this measurement to check the compatibility with the electric controls and brake lines course.
FAQ: Q: My bike has direct lines, does it fit? Q: My bike has only one brake line to the Master Cylinder, does it fit? Q: My bike mounts a Japanese ( or Italian ) Master Cylinder, does it fit? See item description and previous faq.
FAQ: Q: I have read the first question and measured the space available under the handlebar. I am still not sure if it fits, what can I do? A: Simple, do not buy the adapter, but buy a Brake Lines kit specific for your bike and have it made for Radial Master Cylinder. See our Brake line kits listing in the Brakes > Brake Hose Kits section.

 
  Customer Questions & Answers
Question:
 Hi, will the adaptor affect fluid flow/pressure going through two banjo bolts as apposed to only one?
July / 06 / 2015
Answer:
No it doesn't.

Question:
 Is the adaptor stainless or titanium?
May / 06 / 2016
Answer:
Hi, it's stainless steel.

Question:
 Hi I have a Yamaha r1 2015 and want to keep the abs but upgrade the master cylinder to a brembo RCS19. I have read that it's a tight fit with the brake lines on the r1 but you have to keep them on to keep the abs. This kit has been mentioned but Is there any product I could buy to help me fit a brembo RCS.Thanks Craig
October / 19 / 2016
Answer:
You don't need this part, you just need a banjo bolt M10x1mm, nothing else.

Question:
 Hi. I have Honda Vtr Sp2, and i currently have stock brake system. Only the original rubber brake hoses are changed with the steel ones. Now i will upgrade the brake calipers with radial Brembo M4 and front brake master cylinder with radial Brembo RCS. Do I also need this adaptor kit for hoses? Is one adaptor enough, or do i need more? Thanks Matija
November / 18 / 2016
Answer:
You need to change the full brake hoses because Calipers fitting are completely different

Question:
 Hi,This adaptor is used to install the Brembo master cylinders RCS 19 in an Ducati Monster 821?Thank you
January / 20 / 2017
Answer:
Hi, yes you can use this adaptor

Question:
 Hi I have a Ktm 690 Duke with a 90 degree banjo fitted to the std master cylinder. I now have upgraded to a Brembo RCS 15. But it fouls the tank shroud. This is exactly what I'm looking for. I gather your kit fits all Brembo Rcs master cylinders?
April / 19 / 2017
Answer:
This part fits every Radial master cylinder, RCS included.

Question:
 I ordered your radial master cylinder adaptor kit. It's now fitted and works great, keeping the std brake line. Great product and very quick delivery. Thanks
April / 29 / 2017
Answer:
Thanks, good feedback are always appreciated.

Question:
 I have Galfer stainless steel lines on my 2008 CBR 1000. I have a dual line set up at the master cylinder. I want to install my RCS19 master cylinder but I'm confused about the LENGTH of the banjo bolt. I understand I need a banjo bolt with a 1.0 thread pitch, but how LONG is the bolt? Are washers required? What size, how many, and in what order are they to be installed? Thanks in advance for your help...
May / 30 / 2017
Answer:
You need a m10x1mm double banjo bolt, this bolt + washers are already included in the RCS box.Please note washers are required to seal the connection. My advice is to service your bike in a workshop, installing brake parts is unsafe if you don't know how it works.

Question:
 So, you're saying the dual line banjo bolt and washers included with the RCS are made specifically for my Galfer brand (not stock) stainless steel brake lines? With the LENGTH being exactly what I need? Wow, that's pretty good how they work with exactly what I have. The bolt magically fits properly with whatever lines I have? Amazing!
May / 31 / 2017
Answer:
I'm saying that the RCS includes a M10x1mm double banjo bolt + washers. They are not specific for any banjo, they are intended to be used with most of the brands. You might need to use extra washers.

Question:
Hi..I have a brembo billet brake master cylinder 19x20. Would like to fit on my Yamaha R1 2017. I was told that I need to have an adapter as the stock line will be very tight without the adapter. Is this adapter is the correct one? And also I do have a banjo pressure switch, do I need an other banjo to use with the adapter? If yes which size it it? Thank you so much
August / 16 / 2017
Answer:
This part is correct, you also need a M10x1mm single bolt banjo (I assume that only one hose arrives to your mc, as stock R1 it is )

Question:
 hi, how is the brake light switched with the 16x18 radial ? I do need see any fitment for a brake light switch, Thanks
April / 17 / 2018
Answer:
You will mount a M10x1mm pressure switch.

Question:
salve, volendo pocedere all' acquisto dell' adattatore e dovendo abbinargli l'idrostop doppio , chiedevo cortesemente, con quale passo del filetto devo acquistare quest'ultimo perchè sia compatibile. potreste cortesemente indicarmi la lunghezza totale dell' adattaore? ( adattatore + idrostop) GRAZIE MILLE
April / 18 / 2018
Answer:
Non ti serve idrostop doppio perchè se hai due tubi che arrivano alla pompa userai il bullone doppio dell'adattatore per i due banjo ed userai idrostop singolo sulla pompa. La misura dell'idrostop singolo sarà M10x1mm se pompa Brembo o M10x1.25 se pompa Nissin.

Question:
 Hi, I have Mt-09 2018 and ordered the fren tubo brake line. I do have a plan to upgrade the stock MC to Brembo RCS 19. Do I need this adaptor If I use the Fren Tubo brake lines and Brembo radial MC?
October / 06 / 2019
Answer:
Yes correct, you need to use this adaptor. Or you can order just the line that start from mc.

Question:
 I plan to upgrade MC to Brembo 17 RCS on my Suzuki GSR 600 (ABS), will this part be sufficient to connect it with my standard lines? Regards.
November / 19 / 2019
Answer:
Hi, yes to connect 17RCS to your oem lines you need only this adapter.

Question:
 Hi,will this part do, for fitting the Dorsoduro 1200 stock (MC to ABS) line to the 17RCS?
December / 16 / 2019
Answer:
Thank you for contacting us through our website. Yes We confirm this part is correct.

Question:
 I am intending to install magura hc1 clutch (mineral oil) and would like to know if the material ‘stainless steel’ is compatible with mineral oil fluid.
January / 18 / 2020
Answer:
Yes sure.

Question:
 Ik would like to mount a Brembo RCS 19 master cylinder on my 2017 Yamaha MT10. My guess is I need this set to mount the OEM brake lines, correct?
February / 20 / 2020
Answer:
Yes correct. It is one of the parts you need.

Question:
 I have a stock 2016 R1m . I wanted to install a brembo rcs19 master on it . Will this kit work? I noticed on another similar question someone had about there 2017 r1 you had said yes the part will work you just need a M10x1mm single banjo bolt? Doesn’t the kit come with this bolt ? Thanks
February / 27 / 2020
Answer:
The answer you are referring is about a billet mc , which has no switch stop, therefore the customer needs also a single banjo pressure switch. For RCS you just need the adapter so far

Question:
 Hello- will this fits a XSr900 please? (Part number 170101)- if not what brake lines kit do you sell for xsr900 please to suit the radial premium 17rcs brembo kit for xsr900 you also sell. Also what clutch lever do you sell brembo wise that will fit on the left side that will work with the stock xsr900 lever mount or do I need mount and lever off you? Is this lever suitable?(part number 110B01295)Look forward to your replies kindly please;Mark.
April / 12 / 2020
Answer:
This part is universal, therefore (please read full note) is compatible with your bike and is alternative to a custom made brake line kit. Lever:Part Number: 110B01295 .

Question:
 Hi can this part be used in Brake Calipers also to rotate the Banjo fitting degree
June / 15 / 2020
Answer:
You can use in any position / part of a brake kit, the issue on a caliper is if it can be placed over the caliper, if there is enough clearance for example.

Question:
 Hi I’ve just purchased a Fren Tubo brake line kit for MT-09 SP // but now I also purchased an original Yamaha R6 05-16 RJ15 Brake master cylinder, do you know if I need to purchase this kit or can I just use the fren tubo kit directly on the new original R6 master ?
July / 11 / 2020
Answer:
Yes you need this part.

Question:
 HiIm planning to buy a RCS 17mm radial front master for a KTM 790 Adventure 2020, is this the correct adapter for the 90 degree Banjo?
November / 06 / 2020
Answer:
This part has not a specific application, please read the FAQs

Question:
 Ciao! Voglio comprare la pompa Brembo RCS 19 CORSA CORTA premium black kit, e montarlo in una Hyperstrada 821(OEM pompa è assiale) devo comprare separatamente questo adattore o nel kit c'è tutto?
November / 15 / 2021
Answer:
Questo adattatore non è incluso , se non hai intenzione di cambiare i tubi freno ti serve.

Question:
I have a 09 Suzuki SV650s with stock calipers, Galfer SS brake lines that work with stock MC. I want to buy a Brembo 19 RCS and install for better brake feel and keep the Galfer SS brake lines. I need a parallel- to the ground- banjo fitting to mount the Galfer lines, but for some reason, Brembo's banjo bolt is pointing down. What is the best solution to this problem?  
June / 26 / 2022
Answer:
The only solution is this part.

Question:
 r1 2018 abs i am keepimg oem parts. i have problem rotating brake leve down its bit to high under the master cylinda there is banjo and wire loom so no movement if i use this adaptor to move brake line to the side change the wire loom will this work
November / 03 / 2022
Answer:
We don't know, you could have problems as well. The best choice would be mounting a brake line with a banjo that can move (not fixed) .

Question:
 hi you answered my question r1 2018 abs thanks have got an image banjo that moves. and what i want do is move the brake line to the left or right of the fork as the oem brake line runs down the front of the fork.
November / 03 / 2022
Answer:
This is another request, if you want to rotate 90 degrees this part is correct.

Question:
 hello, i have honda crf 1100 AfricaTwin Adventure Sports 2021 with the basic mounting and brake circuit, i want to put the high pressure hoses fren tybe type1 do i need to buy this kit yes or no?
June / 11 / 2023
Answer:
Do you want to replace stock brake lines on a stock AF ? No need this part.

Question:
 HI, I just bought the 19RCS corsa Corta for my S1000XR 2020 and... i have that issue with the oem brake line. I need a 90° angle. Will this one solve my issue ?tx
July / 06 / 2023
Answer:
Yes. Will solve 90 degree issue.

Question:
Hello CarpiMoto. This can be used in between the Brembo 17RCS Corsa Corta Master Cylinder and BMW R1250GSA 2020 banjo bolt/brake line, correct? Thank you very much. Cheers
July / 12 / 2023
Answer:
It is Universal therefore can be used on every brake line. If it will fit the space under the handlebar on each bike is something we don't know. If it is long enough to connect every line , is something we don't know.

Question:
Hello CarpiMoto. Can this be used on the calipers? I intend to use this on the Brembo M4 calipers to connect the OEM brake lines of the S1000RR 2018. Would this fit on the M4? Thank you very much. Cheers
July / 12 / 2023
Answer:
No, you can't use it.

Question:
Hello CarpiMoto. May I know the reason why I cannot use this on the calipers? Will affect the fluid volume, flow and/or pressure? Thanks. Cheers
July / 20 / 2023
Answer:
You can use everywhere there is a brake inlet. The question is will be placed correctly. If you just watch where is the Brembo M4 caliper inlet (close to the fixing bolt) you will see why on M4 we do not recommend to mount.

Question:
 Hi, i would like to buy rcs19 and put it on my gsxr 600 k7. I know that i need the reservour and that full kit but what else do i need? I read that i would need 1banjo single m10x1. Is that true and if so, is that all the extra i need
December / 20 / 2023
Answer:
Your stock mc is already radial, therefore you just need one M10x1mm banjo bolt .

Question:
 I have now a axial master cilinder, the radial cylinder i have has a banjo connection on the same place, but with an angle. Can i use an adapter on the adapter to get the same angle as i have now on the axial cilinder? Or is adapter on a adapter not save? Bacause i dont see why not
January / 30 / 2024
Answer:
This part was developed just for what you ask. It is safe.

Question:
 Hi I have a 2016 aprilia tuono factory will this kit and adapter be needed to install this master cylinder and if so are there clearance issues ? Don’t wish to hit front nose fairing on full lock ? And is body shorter on the 19 RCS. Than the corsa cotta version ? Thanks for any help
March / 06 / 2024
Answer:
As far we know the 2016 model year does not mount a radial master cylinder (but please check), also it is now 8yo, therefore we may recommend to change also the brake lines and have them brand new and set for radial master cylinder. RCS standard and CC have almost same dimensions.

New Question

Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.

 
 I have read and integrally accept information about use of personal data
*obligatory fields (will not be displayed, we only need them to send you the answer)

Linked Products
Banjo Bolt with Buil-In Pressure Brake / Clutch Light Switch 10x1.0 mm, for one banjoBanjo Bolt with Buil-In Pressure Brake / Clutch Light Switch 10x1.0 mm, for one banjo
Part Number: 0626MQ20
Availability: In Stock
Price  € 12.00 - € 8.16

Banjo Bolt with Buil-In Pressure Brake Light Switch 10x1.0 mm, for two banjosBanjo Bolt with Buil-In Pressure Brake Light Switch 10x1.0 mm, for two banjos
Part Number: 0626MQ30
Availability: In Stock
Price  € 17.00 - € 14.45

Banjo Bolt with Buil-In Pressure Brake Light Switch 10x1.25 mm, for one banjoBanjo Bolt with Buil-In Pressure Brake Light Switch 10x1.25 mm, for one banjo
Part Number: 0626MQ21
Availability: In Stock
Price  € 12.00 - € 8.16

Banjo Bolt with Buil-In Pressure Brake Light Switch 10x1.25 mm, for two banjosBanjo Bolt with Buil-In Pressure Brake Light Switch 10x1.25 mm, for two banjos
Part Number: 0626MQ31
Availability: In Stock
Price  € 17.00 - € 13.60

Brembo Brake Fluid Racing LCF 600 Plus, 500 mlBrembo Brake Fluid Racing LCF 600 Plus, 500 ml
Part Number: 04816411K
Availability: In Stock
Price  € 28.50 - € 24.23

Brembo Brake Fluid SPORT.EVO 500++, DOT4, 250 mlBrembo Brake Fluid SPORT.EVO 500++, DOT4, 250 ml
Part Number: 04816450
Availability: In Stock
Price  € 9.90 - € 8.12

Brembo Terry-Cloth Wristband Brake Fluid Reservoir Protector, Genuine Brembo PartBrembo Terry-Cloth Wristband Brake Fluid Reservoir Protector, Genuine Brembo Part
Part Number: 99015110
Availability: In Stock
Price  € 10.00 - € 8.00

Motul Brake Fluid Dot 3 & 4, 500 mlMotul Brake Fluid Dot 3 & 4, 500 ml
Part Number: 102718
Availability: In Stock
Price  € 8.22 - € 4.52

Motul Brake Fluid Dot 5.1 , 500 mlMotul Brake Fluid Dot 5.1 , 500 ml
Part Number: 100950
Availability: In Stock
Price  € 8.83 - € 4.86

Motul Racing Brake Fluid RBF 700 Factory Line, 500 mlMotul Racing Brake Fluid RBF 700 Factory Line, 500 ml
Part Number: 109452
Availability: In Stock
Price  € 24.91 - € 12.21

 
   Linked Products